ChargeMaster 1500 Scale/Dispenser Combo
#1
Posted 02 April 2007 - 06:37 AM
#2
Posted 02 April 2007 - 08:18 AM
Time waits for no one--
treasure every moment you have.
#3
Posted 02 April 2007 - 12:04 PM
#4
Posted 02 April 2007 - 12:22 PM
#5
Posted 02 April 2007 - 07:09 PM
#6
Posted 02 April 2007 - 07:44 PM
#8
Posted 02 April 2007 - 08:33 PM
#9
Posted 05 April 2007 - 08:17 PM
#10
Posted 06 April 2007 - 09:47 PM
#11
Posted 06 April 2007 - 10:12 PM
I would guess to say about 5 seconds or so. I have one and I have absolutely no frickin idea how I ever reloaded without it. Here's an example of how it will speed things up...I put the powder tray on the dispenser. It automatically chargers 26.5 grains for my .223. I pick up the pan and load it into a case and set the pan back down on the dispenser. I put the round in the press and seat a bullet. Before I can set the finished round down, the dispenser is already finished and I am ready to repeat. There is no down time with the Chargemaster and it wil literally cut your times down by more than half....I've been looking at the auto measure units, as I shake a bit. How long does the RCBS take to measure a charge of about 20 grains? Thanks.
#12
Posted 06 April 2007 - 10:28 PM
#13
Posted 07 April 2007 - 07:44 AM
#14
Posted 07 April 2007 - 09:19 AM
Time waits for no one--
treasure every moment you have.
#15
Posted 09 April 2007 - 08:10 AM
#16
Posted 09 April 2007 - 08:27 AM
#17
Posted 09 April 2007 - 11:05 AM
#18
Posted 09 April 2007 - 02:00 PM
I had one and like other people I talked with it was slow to measure and very unstable over a period of time. It seems like I had to leave it turned on for hours to get it to stabilize. Several other people I talked with had the same problem. The RCBS is rated the very best a http://www.6mmbr.com...308/1266096.htm too.Hey, have any of you guys used the Lyman 1200?
Time waits for no one--
treasure every moment you have.
#19
Posted 10 April 2007 - 01:37 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users










