WTB, hand pump for PCP air rifle
Posted 14 July 2012 - 12:13 PM
I need some help to decide what brand of hand pump for PCP air rifle as a back up plan to the guppy tank.
So many models like FX, Airforce, Hill and Benjamin PCP Pump.
I would like to be able to fill my Mrod gun and 18cf guppy tank if needed with it to and have a 3 stage pump with air dryer.
Plus easy on service of PCP pump, dryer and o-rings.
Posted 14 July 2012 - 01:15 PM
My name is Brant and I'm an airgunholic
Posted 15 July 2012 - 03:19 PM
Posted 15 July 2012 - 06:10 PM
I was leaning toward the Hill pump over the new Benjamin pump.
The u-tube video of the new Benjamin pump looks like may have weak/wobblly pump arm-linkage that will fail or break over time?
It looks like Hill pump for me...
I thought you said that you could get your guppy filled to 4000 PSI somewhere and would top it off with to 4500 PSI with your Pump?
Posted 16 July 2012 - 08:40 AM
As far as pumping up my Guppy Tank, I don't think I even mentioned that I could do it. I did try to put some air in it with the pump when I first got it, however, it must have taken me around 3 or 4 hours just to get it to 200PSI and I had to wait around 30 minutes between each session of 50 or so pumps because it was heating up something ridiculous. Also, my Benjamin Pump will only pump to around 3500PSI max. So I couldn't pump to 4500PSI even if I wanted too. I do get my guppy tank filled to 4000PSI, but was wishing that they could top it off. I think I will eventually invest in a ShoeBox Compressor and get an oilless compressor to run it, that way I can fill up my guppy to 4500PSI on my own.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users