Signed my paperwork today
#1
Posted 20 October 2009 - 03:59 PM
Real tractors have two cylinders and hand clutches.
My rifle is mine, it isn't for sale, and I only give guns to people that I really like.
#2
Posted 20 October 2009 - 04:39 PM
#3
Posted 20 October 2009 - 06:02 PM
#4
Posted 22 October 2009 - 07:37 PM
#5
Posted 22 October 2009 - 08:39 PM
#6
Posted 22 October 2009 - 10:24 PM
#7
Posted 23 October 2009 - 02:51 PM
... Would you mind if I just sat there and honked my horn for a while?????
Real tractors have two cylinders and hand clutches.
My rifle is mine, it isn't for sale, and I only give guns to people that I really like.
#8
Posted 11 November 2009 - 11:39 AM
#9
Posted 12 November 2009 - 08:50 AM
Well I'll be darned. I didn't know anybody owned or knew how to use a big crescent wrench. Must be the other club. LOL I'll pass on the no BS at the gate when hunters are there. I'll tell the guy with the chopper to buzz you guys maybe he can herd some bootlips over towards ya???
Sure, why should you be any different. Seems like most of the guys from your club like to sit there and shoot the breeze or beat on that gate with a big crescent wrench for ten minutes before they go thru it anyway.
The Outdoor Sportsman in Stockton said they had a few camo Maxus' you could check out if you were so inclined to make the drive. Barnwood still has one 28 incher on their shelf but their price is pretty stiff.
#10
Posted 12 November 2009 - 09:33 AM
Time waits for no one--
treasure every moment you have.
#11
Posted 12 November 2009 - 09:54 AM
Using Dermestid beetles to produce museum quality skulls for your trophy collection.
ΜΟΛΩΝ ΛΑΒΕ
#12
Posted 15 November 2009 - 04:22 PM
Better yet, have that chopper buzz the Cherokee club and San Luis resivoir to get all those birds off the water......I'll tell the guy with the chopper to buzz you guys maybe he can herd some bootlips over towards ya???
Real tractors have two cylinders and hand clutches.
My rifle is mine, it isn't for sale, and I only give guns to people that I really like.
#13
Posted 15 November 2009 - 04:44 PM
Here's the pic Johnny.Have you got the shotgun yet? post a pic of it when you do.
I love the new gun. It is by far the easiest gas operated gun I've messed with to tear down and reassemble for a quick cleaning. I don't know what browning did but this gun doesn't get hardly any powder and gas residue in the action. My Browning Silver gets alot of unburnt powder and gas exhaust in the action but it still keeps on running. This gun hasn't needed the action cleaned since I got it. I've pulled it apart a couple times only to realize that I was just wasting my time so I threw it back together.So far I've put 48 3.5 inch steel loads, 55 3 inch steel loads, 250 2 3/4 low base lead ounce and an eighth loads, and 100 one ounce lead target loads thru it with no problems. I just run a bore snake thru the barrel to keep the chamber clean and wipe the magazine tube with an oily rag at the end of the day and it keeps on eating up any ammo with a 12 on the headstamp.
Real tractors have two cylinders and hand clutches.
My rifle is mine, it isn't for sale, and I only give guns to people that I really like.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users










